M2 Hex Head Screw, ISO 4017 size drawing (PDF)

Datasheet — M2 Hex Head Screw, ISO 4017 by Milo

Open the PDF
M2 Hex Head Screw, ISO 4017Get the CAD modelM2 Hex Head Screw, ISO 4017CC-ISO4017-SZ-M2.pdf

Text of this datasheet

ISO 4017 hexagon head screw, M2

Size drawing - M2 values on the views - | = 20 shown - enlarged 5:1

Sym. Dimensi

Thread pitch

View from above . 3.91 Width across flats 3.82-4.00

= 22.5°

2 4.32 15°-30°

Width across corners

f = 0.175 0.10-0.25 s = 3.91 =0. 3.82-4.00 . . Head height +4 . 5 1.275-1.525 2 0.89 \

Wrenching height

0.175 6.10-0.25

r2 0.10, das 2.6 Washer face height

e 2 4.32

> Bearing face diameter 2 3.34¢

Head top chamfer, deg

| = 20 shown ; lengths 4-20 Underhead fillet radius

Transition diameter

0.80 6.40-1.20

Thread run-out under head

Basic minor diameter (end face) 1.567

= 50° (ISO 4753 CH) Tap drill (method d - P)

End chamfer angle, deg

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 15 - L16.

Notes

s: modeled at the middle of its band; e and kw are checks, not modeled.

TITLE

'? CommunityCAD Size drawing, M2

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head screw - M2

SHEET REV SCALE PROJECTION UNITS CC-1804017-SZ-M2 A 5:11 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.