'?) CommunityCAD
CC-1S04017-DS-M2 revA Size datasheet - M2
ISO 4017 M2 hexagon head screw
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Simplified - M2x20, front view, 2.5:1
kw
dw
da
di tap
a
Dimension Thread pitch
Width across flats
Width across corners
Head height
Wrenching height
Washer face height
Bearing face diameter
Head top chamfer, deg
Underhead fillet radius Transition diameter
Thread run-out under head
Basic minor diameter (end face) Tap drill (method d - P)
End chamfer angle, deg
Threaded - M2x20, front view, 2.5:1
M2 x 0.4, ISO metric coarse, right hand
8 generated, | = 4-20 16 STEP AP214 (simplified + threaded)
Value Level 0.4
3.91 3.82-4.00
2 4.32
1.4 1.275-1.525
2 0.89
0.175 8.10-0.25
L2- 4 22.5 L2 15-30
La + 2 La + 2
0.80 0.40-1.20
1.567 1.6 < 50
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head screw - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
---
CC-1S04017-DS-M2 revA Size datasheet - M2
'?) CommunityCAD
Lengths | Thread Is Ig Part key 4 tothe head - - is04017-m2x4 5 to the head - - is04017-m2x5 6 to the head - - is04017-m2x6 8 to the head - - iso4017-m2x8 10 to the head - - iso4017-m2x10 12 tothe head = - is04017-m2x12 16 to the head - - is04017-m2x16 20 tothe head - - iso4017-m2x20
Threaded to the head: the full thread from a (middle of 1P-3P).
Conventions
« End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
« Head: hexagon at the modeled s, one corner on +X; washer face (dw min + s) / 2, c high; top chamfer at B (house construction, ADR 0052 amendment 1).
¢ Thread (threaded level): ISO 68-1 basic profile, right hand.
« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a
pule-tap-drill CommunityCAD 2026-10-23 625b582c306e
pule-basic-minor CommunityCAD 2026-10-23 00329692204
iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25f9381 (kept outside the repo) iso4017-2022-sample ISO (preview published by iTeh Standards) n/a £41658422832 (kept outside the repo) iso4017-2022-sample-figure ISO (preview published by iTeh Standards) n/a £41658422832 (kept outside the repo) iso4014-2022-sample ISO (preview published by iTeh Standards) n/a 2e44b7555604 (kept outside the repo) fasten-it-iso4017 fasten.it 2026-10-25 395693958e2b
fasten-it-iso4014 fasten.it 2026-10-25 50a81d6072b8
fasteners-eu-iso4017 fasteners.eu 2026-10-25 161753a8c338
globalfastener-iso4017 globalfastener.com (Internet Archive copy, 2026-10-25 6c30078c626e
captured 2020-07-12)
globalfastener-iso4017-2022 globalfastener.com (Internet Archive copy, 2026-10-25 9aa6930a2aa3 captured 2026-03-16)
fuller-iso4014 Fuller Fasteners 2026-10-25 1130347fbf24 engineersedge-iso4014-4017 Engineers Edge 2026-10-25 1466bfae2ba8
The whole series (verification map, corrections, drawings): CC-ISO4017-DS.
ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Hex head screw - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
