M2 Hex Bolt, ISO 4014 size drawing (PDF)

Datasheet — M2 Hex Bolt, ISO 4014 by Milo

Open the PDF
M2 Hex Bolt, ISO 4014Get the CAD modelM2 Hex Bolt, ISO 4014CC-ISO4014-SZ-M2.pdf

Text of this datasheet

ISO 4014 hexagon head bolt, M2

Size drawing - M2 values on the views - | = 16 shown - enlarged 5:1

Source levels Sym. Dimensi Main value = the modeled value (nominal, else the

middle of min-max). Thread pitch . Grey under a value = its min-max, where the source gives both. 3.91 </ = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free Width across corners 2 4,32 preview, or the maker's drawing). L1 = two or more independent sources agree: the 1.4 release gate.

Head height LO = one source only: printed amber and marked *. 1.275-1.525

Width across flats 3.82-4.00

c = a source value was corrected; the datasheet

> dw = 3.34c —~ Wrenching height 2 0.89 says how.

Ig < 6.0, Is = 4.0 House convention = a detail no source dimensions, “ , drawn to a stated house rule. r2 0.10, da < 2.6 0.175

Washer face height This size's values: L2 15 - L16. 8.10-0.25 Notes 2 3.34c s: modeled at the middle of its band; e and kw are

checks, not modeled.

Bearing face diameter

| = 16 shown lengths 16-20 Head top chamfer, deg

Underhead fillet radius

b = 10 ref

Transition diameter

= 50° (ISO 4753 CH) 1.93

Shank diameter 1.86-2.00

Thread length a) Fe

Transition length

Basic minor diameter (end face)

View from above

Tap drill (method d - P)

End chamfer angle, deg

TITLE

'? CommunityCAD Size drawing, M2

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head bolt - M2

SHEET REV SCALE PROJECTION UNITS CC-1804014-SZ-M2 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE

cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.