ISO 4014 hexagon head bolt, M2
Size drawing - M2 values on the views - | = 16 shown - enlarged 5:1
Source levels Sym. Dimensi Main value = the modeled value (nominal, else the
middle of min-max). Thread pitch . Grey under a value = its min-max, where the source
gives both.
3.91 </ = = the source gives only that limit, modeled at
it. ref = reference. L2 = the standard itself (or its complete free Width across corners 2 4,32 preview, or the maker's drawing).
L1 = two or more independent sources agree: the 25 c= 0.175 1.4 release gate.
0.10-0.25 Head height LO = one source only: printed amber and marked *. 1.275-1.525
Width across flats 3.82-4.00
c = a source value was corrected; the datasheet
2 dw = 3.34c —~ Wrenching height 2 0.89 says how. House convention = a detail no source dimensions, 9.175 drawn to a stated house rule. r= 0.10, da < 2.6 Washer face height . This size's values: L2 15 - L16. 8.10-0.25 Notes 2 3.34c s: modeled at the middle of its band; e and kw are checks, not modeled.
Bearing face diameter
| = 16 shown lengths 16-20 Head top chamfer, deg
Underhead fillet radius
b = 10 ref
Transition diameter
= 50° (ISO 4753 CH) 1.93
Shank diameter 1.86-2.00
Thread length a) Fe
Transition length
Basic minor diameter (end face)
View from above
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M2
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head bolt - M2
SHEET REV SCALE PROJECTION UNITS CC-1804014-SZ-M2 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE
€05¢8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.