ISO 4028 hexagon socket set screw, dog point, M2
Size drawing - M2 values on the views - | = 4 shown: enlarged 20:1
Sym. Dimensi a = 50° (CH) Thread pitch
0.900 6.887-8.913
Socket across flats
21.011 Socket across corners
Socket depth, short lengths
|= 4 shown Socket depth, other lengths lengths 2.5-10 0.875
0.75-1.60
Dog diameter
Dog length, short lengths 8.625 B < 50° (ISO 4753 SD/LD) 0.50-0.75
1.125 1.00-1.25
Dog length, other lengths
< 50
Dog chamfer to axis, deg
Basic minor diameter (end face)
Tap drill (method d - P)
Socket-end chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.
Notes
Short lengths (sheet DO1) take the 'short' t and z. s = 0.900 0.887-0.913 N
e21.011 TITLE
'? CommunityCAD Size drawing, M2
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, dog point - M2
SHEET REV SCALE PROJECTION UNITS CC-1S804028-SZ-M2 A 20:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
82d0e3f1e4052a4ecS59d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
View on the socket end
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.