ISO 4029 hexagon socket set screw, cup point, M2
Size drawing - M2 values on the views - | = 3 shown - enlarged 20:1
di = 1.567 Thread pitch
a <= 50° (CH) 0.900
0.887-0.913
Socket across flats
21.011 Socket across corners
Socket depth, short lengths
l= 3 shown Socket depth, other lengths lengths 2-10 0.875
0.75-1.00
Cup rim diameter
6 = 120° ref, recess (ref) ; < 50 Cup chamfer to axis, deg
Cup recess angle, deg B < 50° (ISO 4753 CP) Basic minor diameter (end face)
Tap drill (method d - P)
Socket-end chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.
Notes
Short lengths (sheet DO1) take the 'short' t.
View on the socket end |
s = 0.900 _0.887-0.913
XQ
TITLE
'? CommunityCAD Size drawing, M2
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4029:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, cup point - M2
SHEET REV SCALE PROJECTION UNITS CC-1S804029-SZ-M2 A 20:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
