'?) CommunityCAD
CC-1S04027-DS-M2 revA Size datasheet - M2
ISO 4027 M2 hexagon socket set screw, cone
point
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread
Lengths Files
Simplified - M2x10, front view, 5:1 Threaded - M2x10, front view, 5:1
Sym. Dimensi
P Thread pitch
s Socket across flats
e Socket across corners
t Socket depth, short lengths
t Socket depth, other lengths
dt Cone flat diameter
y Cone angle (included), deg
y Cone angle, short lengths, deg
d1 Basic minor diameter (end face) tap Tap drill (method d - P)
a Socket-end chamfer angle, deg
M2 x 0.4, ISO metric coarse, right hand
8 generated, | = 2-10
16 STEP AP214 (simplified + threaded)
Value Level 0.4 L1 +3 0.900 l1 +2
0.887-0.913
2 1.011 1-3 2 0.8 1-3 > 1.7 La - 3 $0.5 l1- 3 90 12-2 120 L1- 2 1.567 l1 +2 1.6 L1 +2 < 50 2-1
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source
value was corrected. Level - independent sources.
ISO 4027:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, cone point - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec cfd05b053c736a4f15ba3030aa41Febd40cdc205
---
CC-1S04027-DS-M2 revA Size datasheet - M2
'?) CommunityCAD
Lengths | Thread t deg Part key 2 full, short 2 0.8 120 is04027-m2x2 2.5 full, short 2 0.8 120 iso4027-m2x2-5 3 full, short 2 0.8 120 is04027-m2x3 4 full, long 21.7 90 is04027-m2x4 5 full, long 21.7 90 is04027-m2x5 6 full, long > 1.7 90 is04027-m2x6 8 full, long 21.7 90 is04027-m2x8 10 full, long 21.7 90 is04027-m2x10
Fully threaded. t = the socket depth modeled (t min, short or long by length). Which lengths are short has one source (LO, #584 item 4).
Conventions
« Socket end: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit. * Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t min.
« Cone point: ISO 4753 TC, a cone at the Figure 1) angle (footnote f's angle on the lengths the data marks as short) down to the flat dt, modeled at dt max.
¢ Thread (threaded level): ISO 68-1 basic profile, the full length, cut by both ends. « Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
amesweb-tap-drill AMESweb. 2026-10-23 e6501cc1414a
pule-tap-drill CommunityCAD 2026-10-23 625b582c306e
pule-basic-minor CommunityCAD 2026-10-23 00329692204
iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25F9381 (kept outside the repo) fuller-iso4026 Fuller Fasteners 2026-10-25 49ba2edb36b7
fuller-iso4027 Fuller Fasteners 2026-10-25 03523ae5e142
fuller-iso4028 Fuller Fasteners 2026-10-25 Of0a658d8693
fuller-iso4029 Fuller Fasteners 2026-10-25 d420e5e6b5f8
fasten-it-is04026 fasten.it 2026-10-25 e111077c7750
fasten-it-iso4027 fasten.it 2026-10-25 4eéd0ee0a98b6
fasten-it-is04028 fasten.it 2026-10-25 b1f3ca7c19b6
fasten-it-iso04029 fasten.it 2026-10-25 198cb790d686
amesweb-is04026-4029 AMESweb 2026-10-25 0643acf2a4F2 iso4753-2011-sample-text ISO (preview published by iTeh Standards) n/a 7526d25F9381 (kept outside the repo) accu-iso4027 Accu Ltd (accu-components.com) 2026-10-26 a284827321d0
The whole series (verification map, corrections, drawings): CC-ISO4027-Ds.
ISO 4027:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Set screw, cone point - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
