. CC-EN10365-IPN-DS-IPN180 rev A '?) CommunityCAD Size datasheet - IPN180
IPN180 taper flange steel |-beam
Size datasheet: this size's values with their levels, conventions and sources.
Part keys en10365 -ipn180x100 ... (one per stock length)
Files 6 STEP AP214 (simplified), one per stock length
IPN180, end view, 0.5:1
Sym. Dimension Value Level h Depth 180 L1- 3 b Flange width 82 L1 - 3 tw Web thickness 6.9 L1 - 3 tf Flange thickness 10.4 L1 - 3 ra Root radius 6.9 L1- 3 r2 Toe radius 4.1 L1- 2 slope Inside flange slope, percent 14x lo- 1
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
EN 10365:2017, DIN 1025-1 (through free tables) Page 1/2 Taper flange steel |- beam - IPN180 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cf97ec3d4371c71b640bbad6d8f4575a152a57f8
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-EN10365-IPN-DS-IPN180 rev A '?) CommunityCAD Size datasheet - IPN180
Lengths | Thread Part key
100 built - - en10365-ipn180x100
250 built - - en10365-ipn180x250
500 built - - en10365-ipn180x500 1000 built - - en10365-ipn180x1000 2000 built - - en10365-ipn180x2000 6000 built S - en10365-ipn180x6000
One STEP file per stock length.
Conventions
« Taper flanges: The outer flange face is flat; the inside face slopes at the flange slope, thinnest at the tip, and passes through tf at the measuring position drawn. One root fillet r1; a toe round r2 on the tip's inside edge, tangent to the slope and the square end face; the outside edge sharp.
« Tolerances and detailing: Nominal section: the EN 10024, EN 10034 and EN 10279 tolerances aren't modeled, nor the sources' detailing columns (d, bolt size, e, p) or any holes.
« Ends, lengths, finish: Flat ends square to the length, sharp edges (a sawn bar). The stock lengths as file options, length tolerance not modeled. No markings. Mid-grey mill scale with bright sawn ends, appearance only.
Sources
Source Publisher Retrieved sha256
arcelormittal-en10365-ipn ArcelorMittal 2026-10-30 afO1falce4c5 (kept outside the repo) stad-en10365-ipn STAD 2026-10-31 87¢4703817d3 schweizer-fn-en10365-ipn Schweizer-FN 2026-11-02 76188aa6c89a
The whole series (verification map, corrections, drawings): CC-EN10365-IPN-DS.
EN 10365:2017, DIN 1025-1 (through free tables) Page 2/2 Taper flange steel |- beam - IPN180 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cf97ec3d4371c71b640bbad6d8f4575a152a57f8
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.