EN 10365 IPN taper flange steel I-beam, IPN120
Size drawing - IPN120 values on the views - enlarged 1.5:1
IPN120
Depth 126
Flange width
Web thickness
tf Flange thickness
ri Root radius
r2 Toe radius
slope Inside flange slope, percent
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L16 - LO 1.
Notes
Flange slope from ArcelorMittal's sales programme, single source (ADR 0119 row 9).
slope = 14* %
TITLE
'? CommunityCAD Size drawing, IPN120
STANDARDS FOLLOWED FAMILY / DETAIL
EN 10365:2017, DIN 1025-1 (through free tables) Taper flange steel I-beam - IPN120 SHEET REV SCALE PROJECTION UNITS CC-EN10365-IPN-SZ-IPN120 A 1.5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE cf97ec3d4371c71b640bbad6d8F4575a152a57F8 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.