. CC-EN10365-IPE-DS-IPE200 rev A '?) CommunityCAD Size datasheet - IPE200
IPE200 parallel flange steel |-beam
Size datasheet: this size's values with their levels, conventions and sources.
Part keys en10365 -ipe200x100 ... (one per stock length)
Files 6 STEP AP214 (simplified), one per stock length
IPE200, end view, 0.5:1
Sym. Dimension Value Level h Depth 200 L1-3 b Flange width 100 L1- 3 tw Web thickness 5.6 L1- 3 tf Flange thickness 8.5 L1- 3 r Root radius 12.0 L1- 3
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
EN 10365:2017, DIN 1025-5 (through free tables) Page 1/2 Parallel flange steel |-beam - IPE200 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 3f1f0bcc2f84058e6b82af2d668b32037245d475
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-EN10365-IPE-DS-IPE200 rev A '?) CommunityCAD Size datasheet - IPE200
Lengths | Thread Part key
100 built - - en10365-ipe200x100
250 built - - en10365-ipe200x250
500 built - - en10365-ipe200x500 1000 built - - en10365-ipe200x1000 2000 built - - en10365-ipe200x2000 6000 built S - en10365-ipe200x6000
One STEP file per stock length.
Conventions
« Flanges and edges: Flanges tf thick with parallel faces; one root fillet r tangent to the web and the flange's inside face; square flange tips and sharp outer corners.
¢ Tolerances and detailing: Nominal section: the EN 10024, EN 10034 and EN 10279 tolerances aren't modeled, nor the sources' detailing columns (d, bolt size, e, p) or any holes.
« Ends, lengths, finish: Flat ends square to the length, sharp edges (a sawn bar). The stock lengths as file options, length tolerance not modeled. No markings. Mid-grey mill scale with bright sawn ends, appearance only.
Sources
Source Publisher Retrieved sha256
arceLlormittal-en10365-ipe ArcelorMittal 2026-10-30 afO1falce4c5 (kept outside the repo) stad-en10365-ipe STAD 2026-10-31 5121773fcb7F schweizer-fn-en10365-ipe Schweizer-FN 2026-11-02 3170312230fc
The whole series (verification map, corrections, drawings): CC-EN10365-IPE-DS.
EN 10365:2017, DIN 1025-5 (through free tables) Page 2/2 Parallel flange steel |-beam - IPE200 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 3f1f0bcc2f84058e6b82af2d668b32037245d475
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.