EN 10365 IPE parallel flange steel I-beam, IPE160
Size drawing - IPE160 values on the views - scale 1:1
'? CommunityCAD
Depth
Flange width
Web thickness
Flange thickness
Root radius
IPE160
160
82
5.0
7.4
9.0
Source levels
Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L15.
TITLE
Size drawing, IPE160
STANDARDS FOLLOWED EN 10365:2017, DIN 1025-5 (through free tables)
FAMILY / DETAIL
Parallel flange steel |-beam - IPE160
SHEET
REV SCALE
CC-EN10365-IPE-SZ-IPE160 A 1:1
PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
3f1fObcc2F84058e6b82af2d668b32037245d475
LICENSE
CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.