ISO 3245 drawn cup needle roller bearing, open ends (HK), HK2210
Size drawing - HK2210 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 2:1
Bearing
HK2210
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 4.
Notes
2 r: the sources give r_s min only; modeled at that limit (the smallest stated).
The cup and the needle rollers are illustrative, not any maker's design, sheet DO2.
View from above
TITLE
'? CommunityCAD Size drawing, HK2210
STANDARDS FOLLOWED FAMILY / DETAIL ISO 3245 (edition not printed by the sources) Drawn cup needle roller bearing, HK - HK2210
SHEET REV SCALE PROJECTION UNITS
CC-1S803245-SZ-HK2210 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.