* CC-1S03245-DS-HK1516 rev A '?) CommunityCAD Size datasheet - HK1516
ISO 3245 HK1516 drawn cup needle roller bearing
Size datasheet: this bearing's values with their levels, conventions and sources.
For 15 mm shafts running directly on the rollers
Part key iso3245-hk1516
Files 1 STEP AP214 (simplified), cup and rollers
HK1516, front view, 1:1 HK1516, view from above, 1:1 Sym. Dimension Value Level Fw Diameter under the rollers 15 L1-4 D Outside diameter 21 L1-4 c Width 16 las 4 r Chamfer dimension r_s min > 0.8 L1- 3
Modeled value: nominal, else the midpoint of min-max. =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 3245 (edition not printed by the sources) Page 1/2 Drawn cup needle roller bearing - HK1516 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-1S03245-DS-HK1516 rev A '?) CommunityCAD Size datasheet - HK1516
Conventions
¢ Cup (illustrative): Wall s = (D - Fw)/6 thick; each open end's lip turned in to Fw + 2s, s thick. Not any maker's design.
« Needle rollers (illustrative): No cage. Diameter Dw = (D - Fw)/2 - s on the circle Fw + Dw, length C - 4s, centred in the width, as many as fit at a pitch of 1.25 Dw, each a separate solid. Not any maker's design; measured only for fit.
« Corners: Outside corners are quarter-rounds of r_s min, the smallest any maker states; the shape isn't specified. Lip edges are sharp.
« Values: Fw, D and C at their nominals; r at r_s min, the only limit the sources give.
* Markings and grades: No markings. Tolerances, radial clearance and lubricant are not geometry: one model per bearing.
Sources
Source Publisher Retrieved sha256
skf-17000-hk SKF 2026-10-26 65e0919bee24 (kept outside the repo) schaeffler-hri-hk Schaeffler (INA) 2026-10-29 9e4e2e13d41b (kept outside the repo) koyo-bs007-hk JTEKT (Koyo) 2026-10-29 183fd#7204d6 (kept outside the repo) ntn-bearingfinder-hk NTN Americas 2026-10-29 f7aebdabba9b
The whole series (verification map, corrections, drawings): CC-ISO3245-Ds.
ISO 3245 (edition not printed by the sources) Page 2/2 Drawn cup needle roller bearing - HK1516 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.