5.25-inch bay device envelope, half height
Size drawing - half height values on the views - scale 1:2 Sym. Dimensio! xs1 = 47.40 ps = 79.25
Body height, A1 (max) < 41.53 tb = 9.00 ig Body width, AS 146.05
145.80-146.30
Length behind the bezel, A4 (max) < 202.80
Hb = 42.30 Hs 41.53 Bezel height, A2 42.30 Bezel width, A3 148.00 Bezel thickness, A17 5.00
Bezel front extent, A16 (recorded, not reached)
L s 202.80 Bezel to the first side holes, A10 Side holes apart, ATI
dl = 3.5 house, tt = 1.25 house Side holes above the bottom, A13 Upper side holes above the bottom, A14
Bezel to the first bottom holes, AQ
Bottom holes apart, A8
Side to the bottom holes, A7 3.18
Bottom holes across, A6 139.70
Connector width, A2 (SFF-8523) 42.73 ref
Datum B width, A3 33.39 ref
Side to datum B, A13. 31.34 ref
= W = 146.05 Wb = 148.00 145.80-146.30
Datum B centre off the centreline, A11 25.00
10.00 9.62-10.38
Connector centre height, A7
Connector height, AS 4.00 ref
cb = 31.34
Connector end to datum C, A8 4.90
Lead-in @, 90° (house: D + P) 3.5
Full thread from the face (house: lead-in + 2 P)
xb1 = 47.40 pb = 79.25
Source levels
Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). '? CommunityCAD Size drawing, half height
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *. STANDARDS FOLLOWED FAMILY / DETAIL
¢ = a source value was corrected; the datasheet says how. SFF-8551 Rev 3.3 - SFF-8523 Rev 1.4 (SNIA) 5.25-inch bay device - half height House convention = a detail no source dimensions, drawn to a stated house rule. SHEET REV SCALE PROJECTION UNITS
This size's values: L2 22. CC-BAY525-SZ-half-height A 1:2 Dimensions in mm Notes SPEC VERSION LICENSE PAGE SFF-8551 Rev 3.3 and SFF-8523 Rev 1.4, Table 5-1; H, L maxima, modeled at them. c99abOdF609Fc36b5ac2c83cI461FF3cOF782a76 CC-BY 4.0 IronPixel Labs LLC 1/1 Holes: M3, two full threads below the house lead-in (#1381 item 2 B): dl and tt.
TITLE
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.