Flanged miniature deep groove ball bearing, F and MF series, F696
Size drawing - F696 values on the views - F696ZZ shown. Built from: open F696 - 2Z F696ZZ - enlarged 5:1
Bearing
F696 15.000 17.000 F696ZZ 15.000 17.000
Source levels d = 6.000
Main value = the modeled value (nominal, else the middle of min-max). | Grey under a value = its min-max, where the source gives both. D = 15.000 < / = = the source gives only that limit, modeled at it. ref = reference.
| | | L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L112. Notes 2 r: the sources give r_s min only; modeled at that limit. A row is a product as sold: no suffix open, ZZ shielded (2Z), DD or VV sealed (2RS). Ring corners, faces and the shield recess, and the flange's edges, are house conventions, sheet D0O2.
D1 = 17.000
D1 = 17.000
View from above TITLE
'? CommunityCAD Size drawing, F696
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard: NSK, MinebeaMitsumi and NTN listings Flanged miniature ball bearing - F696 SHEET REV SCALE PROJECTION UNITS CC-BRG-MINI-FL-SZ-F696 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE 70b2bf787ea8F07904ce030afS0bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.