Flanged miniature deep groove ball bearing, F and MF series, F694
Size drawing - F694 values on the views - F694ZZ shown. Built from: open F694 - 2Z F694ZZ - 2RS F694ZZ - enlarged 5:1
Bearing
F694 2 0.15 12.5 F694ZZ 11.000 2 0.150 12.500
Source levels d= 4.000
Main value = the modeled value (nominal, else the middle of min-max). | Grey under a value = its min-max, where the source gives both. D = 11.000 < / = = the source gives only that limit, modeled at it. ref = reference.
T | | L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L112.
Notes
: r 2 r: the sources give r_s min only; modeled at that limit.
A row is a product as sold: no suffix open, ZZ shielded (2Z), DD or VV sealed (2RS). D1 = 12.500 Ring corners, faces and the shield recess, and the flange's edges, are house conventions, sheet D0O2.
2RS: width as the shielded bearing; sealed row not listed by the sources.
D1 = 12.500
View from above
TITLE
'? CommunityCAD Size drawing, F694
STANDARDS FOLLOWED FAMILY / DETAIL No published standard: NSK, MinebeaMitsumi and NTN listings Flanged miniature ball bearing - F694
SHEET REV SCALE PROJECTION UNITS
CC-BRG-MINI-FL-SZ-F694 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 70b2bf787ea8F07904ce030af50bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.