Flanged miniature deep groove ball bearing, F and MF series, F693
Size drawing - F693 values on the views - F693ZZ shown. Built from: open F693 - 2Z F693ZZ - 2RS F693ZZ - enlarged 10:1
Bearing
F693 F693ZZ
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L112.
Notes C1 = 0.900 =r: the sources give r_s min only; modeled at that limit.
A row is a product as sold: no suffix open, ZZ shielded (2Z), DD or VV sealed (2RS). Ring corners, faces and the shield recess, and the flange's edges, are house conventions, sheet D0O2. 2RS: width as the shielded bearing; sealed row not listed by the sources.
D1 = 9.500
TITLE
'? CommunityCAD Size drawing, F693
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard: NSK, MinebeaMitsumi and NTN listings Flanged miniature ball bearing - F693 H SHEET REV SCALE PROJECTION UNITS
D1 = 9.500 CC-BRG-MINI-FL-SZ-F693 A 10:1 € Dimensions in mm
i SPEC VERSION LICENSE PAGE
70b2bf787ea8F07904ce030afSObcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
View from above
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.