CC-BRG-MINI-FL-DS-F608 rev A Size datasheet - F608
'?) CommunityCAD
F and MF series F608 flanged miniature ball bearing
Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold.
For 8 mm shafts Part keys bearings - miniature - flanged- Pt | £608, bearings- miniature - flanged-f608-2z Files 2 STEP AP214 (simplified)
Built from open F608 - 2Z F608ZZ
F608ZZ, front view, 1.5:1 F608ZZ, view from above, 0.75:1 Sym. Dimension Value Level d Bore diameter, F608 8.000 la - 3 D Outside diameter, F608 22.000 la - 3 B Width, F608 7.000 ll - 3 r Chamfer dimension r_s min, F608 > 0.300 L1- 3 D1 Flange diameter, F608 25.000 1-3 C1 Flange width, F608 1.500 L1- 3 d Bore diameter, F608ZZ 8 L1- 2 D Outside diameter, F608ZZ 22 L1- 2 B Width, F608ZZ 7 L1 + 2 r Chamfer dimension r_s min, F608ZZ > 0.3 L1- 2 D1 Flange diameter, F608ZZ 25 L1- 2 C1 Flange width, F608ZZ 1.5 L1- 2
Modeled value: nominal, else the midpoint of min-max. =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard: NSK, MinebeaMitsumi and NTN listings Page 1/2 Flanged miniature ball bearing - F608 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-BRG-MINI-FL-DS-F608 rev A '?) CommunityCAD Size datasheet - F608
Conventions
e Rings and corners: Bore d, outside diameter D and width B at the nominals of the product's own row; the rings concentric, their faces flush. Ring corners are quarter-rounds of r_s min; the shape isn't specified.
« Ring faces: Each ring's face is (D - d)/8 wide; the annulus between them is the middle half of the radial section.
¢ Shield and seal (2Z, 2RS): A flat annulus recessed r_s min / 2 below the ring faces, the same for both: no groove, snap wire or lip. Each is built from its own row; a 2RS with no sealed row listed takes the shielded row, labelled.
« Open bearing: The annulus recessed B/4 per face, leaving a solid web between the rings. Balls, cage and raceways are not modeled.
« Flange: A plain disc D1 x C1 flush with the flange - side ring face at Z = 0, its outer edges rounded at r_s min; no relief groove, the corner at its root sharp.
« Values: d, D, B, D1 and C1 at their nominals; r at r_s min, the only limit the sources give. * Markings and grades: No markings. Tolerance class, internal clearance and lubricant are not geometry: one model per bearing and product.
Sources Source Publisher Retrieved sha256 nsk-miniature-flanged NSK 2026-10-28 bQ556841F716 nmb-miniature-flanged MinebeaMitsumi (NMB) 2026-10-29 325e325FFd26 ntn-bearingfinder-miniature-flanged NTN Americas 2026-10-29 £2374598F626
The whole series (verification map, corrections, drawings): CC- BRG- MINI-FL-DS.
No published standard: NSK, MinebeaMitsumi and NTN listings Page 2/2 Flanged miniature ball bearing - F608 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.