Enclosed Switching Power Supply, Mean Well LRS-35 size drawing (PDF)

Datasheet — Enclosed Switching Power Supply, Mean Well LRS-35 by Milo

Open the PDF
Enclosed Switching Power Supply, Mean Well LRS-35Get the CAD modelEnclosed Switching Power Supply, Mean Well LRS-35CC-PSULRS-SZ-lrs-35.pdf

Text of this datasheet

Mean Well LRS enclosed power supply, LRS-35

Size drawing - LRS-35 values on the views - terminal end at the left, as Mean Well draws it - scale 1:2

Sym. Dimensi

Terminal end Length xgs = 6.5 Width xs =10 Height

xs = 74

P General tolerance, +

Bottom holes' thread, M

Bottom holes, count

Bottom holes, depth L

Bottom holes from the terminal end

Bottom holes apart, along

Bottom holes from the front face

L=99

Side holes' thread, M ns = 2,ds=3,ts=5 Side holes, count Side holes, depth L

Side holes from the terminal end Side hole columns apart

First column's lowest hole, height Plain hole, bottom, @

Plain hole from the terminal end

Notch centre from the front face

Plain hole from the notch

Plain hole, front face, @

Front plain hole from the terminal end Front plain hole, height

Terminal pitch

Terminal opening

Terminals, count

Plain hole to the notch, along (recorded)

Front plain hole to the notch (recorded) xb=20.5 Pxb=55

Notch width (recorded)

Notch width, side view (recorded)

nb = 2, db = 3, tb = 3.0

Notch height (recorded)

Lead-in @, 90° (house: D + P)

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *. '? CommunityCAD Size drawing, LRS-35 c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. STANDARDS FOLLOWED ; FAMILY / DETAIL No published standard: Mean Well's datasheet drawing of each model Mean Well LRS enclosed power supply - LRS-35

TITLE

This size's values: L2 31. Notes SHEET REV SCALE PROJECTION UNITS

CommunityCAD's model from Mean Well's published drawing; not a Mean Well file (ADR 0141). CC-PSULRS-SZ-1Lrs-35 A 1:2 Dimensions in mm Tapped holes: thread to the drawing's L, then a 118° drill point; dl is a house lead-in. SPEC VERSION LICENSE PAGE

(recorded): on the drawing, in the data, not modeled (tabs, notch and chains to it). cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1 Not drawn on the sheets (house style, sheet DO2): perforation, vents, screws, label, mark.

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.