CC-PSULRS-DS-1rs-200 revA Size datasheet - LRS-200
'?) CommunityCAD
Mean Well LRS-200 enclosed power supply
Size datasheet: CommunityCAD's model from Mean Well's published drawing, not a Mean Well file. This model's values with their levels, conventions and sources.
Part key psu-meanwell-Irs-200 Files 2 STEP AP214 (simplified +
LRS-200, front view, 1:5 LRS-200, view from above, 1:5 Sym. Dimension Value L Length 215 Ww Width 115 H Height 30 tg General tolerance, + 1 db Bottom holes' thread, M 4 nb Bottom holes, count 4 tb Bottom holes, depth L 3 xb Bottom holes from the terminal end 32.5 pxb Bottom holes apart, along 150 yb Bottom holes from the front face 32.5 pyb Bottom holes apart, across 50 ds Side holes' thread, M 4 ns Side holes, count 4 fs Side hole faces (2: both long sides) 2 ts Side holes, depth L 5 xs Side holes from the terminal end 32.5 pxs Side hole columns apart 150 zs First column's lowest hole, height 12.5 wst Side slot width 2 hst Side slot height 6.9 zsl Side slot bottom, height 12.8 est Side slot from its hole, terminal side 6.5 esr Side slot from its hole, far side 6.5 pt Terminal pitch 9.5 wt Terminal opening 8 nt Terminals, count 9
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at it. * amber: one source (LO). house: a stated house rule. Level - independent sources.
No published standard: Mean Well's datasheet drawing of each model Page 1/2 Mean Well LRS enclosed power supply - LRS-200 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-PSULRS-DS-Lrs-200 revA 0 CommunityCAD Size datasheet - LRS-200
Dimensions (continued)
Dimension
Tab holes span (recorded)
twb Tab width (recorded) 15 tr Tab reach (recorded) 16 du Lead-in @, 90° (house: D + P) 4.7 house
Conventions
« Mean Well's drawing, CommunityCAD's model: Each model's outline, tapped holes, plain holes, side slots and terminal pitch are from Mean Well's published datasheet drawing (ADR 0089). This is CommunityCAD's model made from it, not a file from Mean Well; Mean Well's own STEP files were a cross-check only (#225 answer 4). Mornsun's LM series adds a second lineage.
« Frame: The bottom face at z = 0, centred; the length along X with the terminal end toward +X, the front face (the drawing's side view) toward +Y. These sheets show the part turned 180° about Z, terminal end at the left, as Mean Well draws it.
« Tapped holes: M3 and M4, coarse. Full thread to the drawing's depth L, then a 118° drill point; a house 90° lead-in one pitch wider than D. Simplified: a plain bore at D.
« Terminal bay and strip: Illustrative, as ADR 0141 row 8: a terminal bay of 1.7 pt at the terminal end, floor at 0.4 H, a black strip with nt cells at the sourced pitch and opening (barriers pt - wt, tops at 0.96 H), nickel screws on clamp plates.
« Case, cover and vents: A darker steel case under a light cover with a hexagonal perforation over a dark cavity; a perforated band on the long faces, stamped vents below it; the vertical edges rounded. Not drawn on these sheets: thousands of faces no drawing dimensions.
« Fan (LRS-350, LRS-600): A grille through the cover, 1.7 yf across, a hub and seven blades under it, centred from xf and yf. The drawing dashes it in; the grille's shape is illustrative.
« Label and mark: A black label on the cover with the CommunityCAD mark inlaid, where a real unit has a warning label. No Mean Well branding, text or model number on the model.
Sources Source Publisher Retrieved sha256 meanweLl-Lrs-200 Mean Well Enterprises Co., Ltd. 2026-11-07 d0d9097c390e (kept outside the repo)
The whole series (verification map, drawings): CC-PSULRS-DS.
No published standard: Mean Well's datasheet drawing of each model Page 2/2 Mean Well LRS enclosed power supply - LRS-200 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
