IEC 60086 cylindrical primary battery, D
Size drawing - D values on the views - enlarged 2:1
Sym. Dimension
33.25 32.30-34.20
Body diameter
60.50
Overall height 59.50-61.50
h_pos 2 1.50 - - < 9.50 T d_pos Positive contact diameter
h_pos Positive contact height Loe)
> d_neg Negative contact diameter = 18.08
- < 1.0* e_neg Negative contact recess
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). h = 60.50 L1 = two or more independent sources agree: the release gate. 59.50-61.50 LO = one source only: printed amber and marked *. d = 33.25 c = a source value was corrected; the datasheet says how. 32.30-34.20 House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L15 - LO 1. Notes No IEC 60086 edition is read: the values are the makers' datasheets, reconciled (ADR 0034). The negative end is modeled flush unless e_neg has both limits (sheet D0O2).
d = 33.25 32.30-34.20
TITLE
'? CommunityCAD Size drawing, D
STANDARDS FOLLOWED FAMILY / DETAIL
IEC 60086 (no edition read: makers' datasheets) Cylindrical battery - D
SHEET REV SCALE PROJECTION UNITS CC-IEC60086-SZ-D A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
