docs/CC-IEC60086-COIN-DS-CR2450.pdf

Datasheet — CR2450 Coin Cell Battery (Button Cell), IEC 60086 by Milo

CC-IEC60086-COIN-DS-CR2450 revA Size datasheet - CR2450

'?) CommunityCAD

CR2450 coin cell

Size datasheet: this size's values with their levels, conventions and sources.

Envelope 24.35 x 4.8 mm (modeled) Part key iec60086-cr2450

—_] Files 1 STEP AP214 (simplified)

CR2450, from above, 0.75:1 CR2450, side, 1.5:1

Sym. Dimension Value Level

d Diameter 24.35 L1- 2 24.2-24.50

h Overall height 4.80 L1- 2

4.60-5.00

d_cap Negative cap diameter - -

h_cap Negative cap height - -

r_neg Negative edge radius (LO) - -

Modeled value. < / =: only that limit modeled. * amber: one source (LO). c: a source value was corrected. o: the other limit left open, one maker only (ADR 0073). - : not given. Level - independent sources.

IEC 60086 (no edition read: makers' datasheets) Page 1/2 Coin and button cell - CR2450 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 9b4df#795badc431accb99c84ee4535aca47a4367

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

. CC-IEC60086-COIN-DS-CR2450 revA '?) CommunityCAD Size datasheet - CR2450

Conventions

« Values: Each size is the envelope of the makers' datasheets, one lineage per maker. Disagreeing limits take the widest band the makers allow. « Can and cap: A cylinder d x h on the positive face; the negative cap step d_cap x h_cap only where both reach L1.

« Negative edge radius (LO): The can's outer edge at the negative face is rounded to r_neg, Energizer's reference radius, where a sheet gives one: a single lineage, so labelled LO.

« Edges and marking: House style, illustrative: the can crimped over a black gasket around the negative cap, the CommunityCAD logo engraved in the positive face.

Sources Source Publisher Retrieved a256 varta-6450 VARTA (copy hosted by ELV) 2026-10-26 397cO29bb6eb4 energizer-cr2450 Energizer 2026-10-26 537429858e7a

The whole series (verification map, corrections, drawings): CC-IEC60086-COIN-DS.

IEC 60086 (no edition read: makers' datasheets) Page 2/2 Coin and button cell - CR2450 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 9b4df#795badc431accb99c84ee4535aca47a4367

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

Original PDF

Loading PDF…