* CC-IEC60086-COIN-DS-CR2025 rev A '?) CommunityCAD Size datasheet - CR2025
CR2025 coin cell
Size datasheet: this size's values with their levels, conventions and sources.
Envelope 19.85 x 2.35 mm (modeled)
Part key iec60086-cr2025 a Files 1 STEP AP214 (simplified)
CR2025, from above, 1:1 CR2025, side, 2:1
Sym. Dimensi Value Level
d Diameter 19.85 l1 +2 19.70-20.00
h Overall height 2.35 L1- 2
2.20-2.50
d_cap Negative cap diameter 2 18.3% lo- 1
h_cap Negative cap height 2 0.2* lo- 1
r_neg Negative edge radius (LO) - -
Modeled value. < / =: only that limit modeled. * amber: one source (LO). c: a source value was corrected. o: the other limit left open, one maker only (ADR 0073). - : not given. Level - independent sources.
IEC 60086 (no edition read: makers' datasheets) Page 1/2 Coin and button cell - CR2025 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-IEC60086-COIN-DS-CR2025 rev A '?) CommunityCAD Size datasheet - CR2025
Conventions
« Values: Each size is the envelope of the makers' datasheets, one lineage per maker. Disagreeing limits take the widest band the makers allow. « Can and cap: A cylinder d x h on the positive face; the negative cap step d_cap x h_cap only where both reach L1.
« Negative edge radius (LO): The can's outer edge at the negative face is rounded to r_neg, Energizer's reference radius, where a sheet gives one: a single lineage, so labelled LO.
« Edges and marking: House style, illustrative: the can crimped over a black gasket around the negative cap, the CommunityCAD logo engraved in the positive face.
Sources Source Publisher Retrieved sha256 varta-6025 VARTA (copy hosted by ELV) 2026-10-26 666a29bcOd96 energizer-cr2025 Energizer 2026-10-26 db8a98a740ff
The whole series (verification map, corrections, drawings): CC-IEC60086-COIN-DS.
IEC 60086 (no edition read: makers' datasheets) Page 2/2 Coin and button cell - CR2025 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
