CC-IEC60086-COIN-DS-CR2016 rev A Size datasheet - CR2016
'?) CommunityCAD
CR2016 coin cell
Size datasheet: this size's values with their levels, conventions and sources.
Envelope 19.85 x 1.5 mm (modeled) Part key iec60086-cr2016 SS Files 1 STEP AP214 (simplified) CR2016, from above, 1:1 CR2016, side, 2:1 Sym. Dimension Value Level d Diameter 19.85 l1 + 2 19.7-20.00 h Overall height 1.50 L1- 2 1.40-1.60 d_cap Negative cap diameter > 18.4* Lo -1 h_cap Negative cap height > 0.1* Lo -1 r_neg Negative edge radius (LO) - -
Modeled value. < / =: only that limit modeled. * amber: one source (LO). c: a source value was corrected. o: the other limit left open, one maker only (ADR 0073). - : not given. Level - independent sources.
IEC 60086 (no edition read: makers' datasheets) Page 1/2 Coin and button cell - CR2016 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 9b4df#795badc431accb99c84ee4535aca47a4367
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-IEC60086-COIN-DS-CR2016 rev A '?) CommunityCAD Size datasheet - CR2016
Conventions
« Values: Each size is the envelope of the makers' datasheets, one lineage per maker. Disagreeing limits take the widest band the makers allow. « Can and cap: A cylinder d x h on the positive face; the negative cap step d_cap x h_cap only where both reach L1.
« Negative edge radius (LO): The can's outer edge at the negative face is rounded to r_neg, Energizer's reference radius, where a sheet gives one: a single lineage, so labelled LO.
« Edges and marking: House style, illustrative: the can crimped over a black gasket around the negative cap, the CommunityCAD logo engraved in the positive face.
Sources Source Publisher Retrieved a256 varta-6016 VARTA (copy hosted by ELV) 2026-10-26 51ddc7#c4918 energizer-cr2016 Energizer 2026-10-26 7e7a262ea426
The whole series (verification map, corrections, drawings): CC-IEC60086-COIN-DS.
IEC 60086 (no edition read: makers' datasheets) Page 2/2 Coin and button cell - CR2016 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 9b4df#795badc431accb99c84ee4535aca47a4367
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.