IEC 60086 cylindrical primary battery, CR2
Size drawing - CR2 values on the views - enlarged 5:1
Sym. Dimension CR2
15.3 15.0-15.6
Body diameter
< Overall height < 27.0
7.0
d_pos Positive contact diameter
h_pos Positive contact height
d_neg Negative contact diameter
e_neg Negative contact recess
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 4.
Notes
d=153 No IEC 60086 edition is read: the values are the makers' datasheets, reconciled (ADR 0034). 15.0-15.6 The negative end is modeled flush unless e_neg has both limits (sheet DO2).
Left open (ADR 0073): h min, d_pos min, h_pos max.
TITLE
'? CommunityCAD Size drawing, CR2
STANDARDS FOLLOWED FAMILY / DETAIL
IEC 60086 (no edition read: makers' datasheets) Cylindrical battery - CR2
SHEET REV SCALE PROJECTION UNITS CC-IEC60086-SZ-CR2 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE c59Ffdebeb44F40d327cd99112104ee541c4493d4 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.