CR1632 Coin Cell Battery, IEC 60086 size drawing (PDF)

Datasheet — CR1632 Coin Cell Battery, IEC 60086 by Milo

Open the PDF
CR1632 Coin Cell Battery, IEC 60086Get the CAD modelCR1632 Coin Cell Battery, IEC 60086CC-IEC60086-COIN-SZ-CR1632.pdf

Text of this datasheet

IEC 60086 coin and button cell, CR1632

Size drawing - CR1632 values on the views - enlarged 5:1

Sym. Dimension CR1632

15.85 15.70-16.00

Diameter

3.05

Overall height 2.90-3.20

2 13.00* d_cap Negative cap diameter

h_cap Negative cap height 2 Ooaes r_neg Negative edge radius (LO) 1 d = 15.85 Source levels _ 15.70-16.00 Main value = the modeled value (nominal, else the middle of min-max). _ Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 2 - LO 2. Notes No IEC 60086 edition is read: the values are the makers' datasheets, reconciled (ADR 0034).

r_neg: Energizer's reference radius, one lineage, so always LO; modeled by the owner's decision (#786 item 4). The cap step is modeled only where d_cap and h_cap reach L1; - = not given (sheet DO2).

d= 15.85 15.70-16.00

TITLE

'? CommunityCAD Size drawing, CR1632

STANDARDS FOLLOWED FAMILY / DETAIL

IEC 60086 (no edition read: makers' datasheets) Coin and button cell - CR1632

SHEET REV SCALE PROJECTION UNITS CC-IEC60086-COIN-SZ-CR1632]}A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.