IEC 60086 coin and button cell, CR1632
Size drawing - CR1632 values on the views - enlarged 5:1
d= 15.85 15.70~16.00
| d = 15.85 15.70-16.00
Sym. Dimension CR1632
15.85 15.70-16.00
Diameter
3.05
Overall height 2.90-3.20
2 13.00* d_cap Negative cap diameter
> * h_cap Negative cap height 2 Oa
r_neg Negative edge radius (LO)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 2 - LO 2.
Notes
No IEC 60086 edition is read: the values are the makers' datasheets, reconciled (ADR 0034). r_neg: Energizer's reference radius, one lineage, so always LO; modeled by the owner's decision (#786 item 4). The cap step is modeled only where d_cap and h_cap reach L1; - = not given (sheet DO2).
TITLE
'? CommunityCAD Size drawing, CR1632
STANDARDS FOLLOWED
FAMILY / DETAIL
IEC 60086 (no edition read: makers' datasheets) Coin and button cell - CR1632
SHEET
REV SCALE PROJECTION UNITS
CC-1EC60086-COIN-SZ-CR1632| A 5:1 & Dimensions in mm
SPEC VERSION
LICENSE PAGE
9b4df79Sbadc431acch99c84ee4535aca47a4367 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.