Clock 3 Frame
>ot= 59 2s ne QHLWQSwe
aSr-Scos BBHLlB=zB case O=-* S22s5¢2 5s26002 Se O2lan
---
Labeling and Identifying the Frame
This is a simplified view of the outer frame to show how pieces of the frame are identified.
Each piece is labeled following the 'FTL' rule: Front first, then Top, on the Left side.
If a piece has a front face, mark the top left corner with the piece's ID, whether with a sticker or Sharpie. Otherwise, mark the top face in the front left corner.
We will be putting a lot of tee nuts into the frame. They cannot be removed or added without disassembling the frame, so accuracy is important here.
This piece does not have a front face. Place the label or mark on the top face instead, in the front left corner.
For reference, this is the
front, top left f Front face, top left corner ront, top left corner o
the frame.
Front face, top left corner
---
Outer Right Frame
R1 2040 Extrusion, 620mm PN727
R4
2040 Extrusion, 800mm PN740 |]
R3 2040 Extrusion, 800mm PN740
R5 2040 Extrusion, 540mm PN742
2040 Extrusion, 620mm PN741
---
Outer Left Frame
L1 2020 Extrusion, 620mm PN727 L4 hs 2040 Extrusion, 800mm PN740 L3 2040 Extrusion, 800mm PN740 L5 2040 Extrusion, 540mm PN742
L2 2040 Extrusion, 620mm PN741
---
Front and Rear Crossbars
C2 404020 Extrusion, 620mm PN750
C4 2040 Extrusion, 620mm PN741
C3 2040 Extrusion, 620mm PN741
C1 404020 Extrusion, 620mm PN750
---
Door Extrusions
D1 2020 Door Extrusion, 564mm
PN751
D2 2020 Door Extrusion, 646mm
PN752
D4 2020 Door Extrusion, 564mm
PN751
D3
2020 Door Extrusion, 646mm PN752
---
XY Frame and X Crossbar
A5 2020 Extrusion, 620mm PN727
2020 Extrusion, 540mm, Milled PN726
A2 2020 Extrusion, 540mm, Milled PN726
2020 Extrusion, 440mm, Milled PN725
2020 Extrusion, 620mm
---
Bed Frame
B2 2020 Extrusion, 350mm
PN733 B4
2020 Extrusion, 220mm PN732
B1 2020 Extrusion, 220mm PN732
B3 2020 Extrusion, 350mm PN733
---
Z Frame
Z2 2020 Extrusion, 510mm PN729 21 2020 Extrusion, 510mm PN729
Z4 2020 Extrusion, 540mm PN730
Z3 2020 Extrusion, 540mm PN730
Z5 2020 Extrusion, 500mm PN728
---
Electrical Mounting Bars
E2 2020 Extrusion, 620mm PN727
E1 2020 Extrusion, 620mm PN727