IEC 60086 cylindrical primary battery, C
Size drawing - C values on the views - enlarged 2:1
Sym. Dimension
25.55 24.90-26.20
Body diameter
. 49.25 d_pos < 7.50 Overall height 48.50-50.00
< 7.50
h_pos 2 1.50 d_pos Positive contact diameter
h_pos Positive contact height Loe)
2 13.00
d_neg Negative contact diameter
- S 0.9% e_neg Negative contact recess
! rs i)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
d= 25.55 < / = = the source gives only that limit, modeled at it. ref = reference. 24.90-26.20 L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
h = 49.25 48.50-50.00
This size's values: L15 - LO 1.
Notes
No IEC 60086 edition is read: the values are the makers' datasheets, reconciled (ADR 0034). The negative end is modeled flush unless e_neg has both limits (sheet D0O2).
d = 25.55 24.90-26.20
TITLE
'? CommunityCAD Size drawing, C
STANDARDS FOLLOWED FAMILY / DETAIL
IEC 60086 (no edition read: makers' datasheets) Cylindrical battery -C
SHEET REV SCALE PROJECTION UNITS CC-IEC60086-SZ-C A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE c59Ffdebeb44F40d327cd99112104ee541c4493d4 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.