ISO 3245 drawn cup needle roller bearing, closed end (BK), BK2216
Size drawing - BK2216 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 2:1
Bearing
BK2216
Source levels Main value = the modeled value (nominal, else the middle of min-max). D= Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing).
> L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. Ct = 13.3 This size's values: L15. Notes 2 r: the sources give r_s min only; modeled at that limit (the smallest stated). = Ct: the clear depth's minimum; modeled at that limit.
The cup and the needle rollers are illustrative, not any maker's design, sheet DO2.
Fw = 22
D=28
View from above
TITLE
'? CommunityCAD Size drawing, BK2216
STANDARDS FOLLOWED FAMILY / DETAIL ISO 3245 (edition not printed by the sources) Drawn cup needle roller bearing, BK - BK2216
SHEET REV SCALE PROJECTION UNITS
CC-1S03245-BK-SZ-BK2216 | A 21 & Dimensions in mm SPEC VERSION LICENSE PAGE
c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.