BK0709 Needle Bearing (Drawn Cup Needle Roller Bearing), ISO 3245

STEP Supports CommunityCAD0 downloads
BK0709 Needle Bearing (Drawn Cup Needle Roller Bearing), ISO 3245
1 / 5

BK0709 Needle Bearing (Drawn Cup Needle Roller Bearing), ISO 3245

The BK0709 needle bearing (ISO 3245) has a 7 mm bore, an 11 mm outside diameter and a width of 9 mm. Get it as simplified STEP files.

BK0709 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also searched as: BK0709 bearing
  • Model id: iso3245-bk0709
  • Standard: ISO 3245 · size BK0709

Files

Part keySimplified
iso3245-bk0709STEP

Dimensions

Dimension symbols for BK0709 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers77nominalL1
DOutside diameter1111nominalL1
CWidth99nominalL1
CtDepth to the closed end7.47.4single limit (min), modeled at the limitL1
rChamfer dimension0.40.4single limit (min), modeled at the limitL1

Drawing

Drawing of the BK0709 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-BK-SZ-BK0709.pdf.

The BK0709 needle bearing beside the BK0609 and the BK0808

The BK0709 is number 5 of the 29 ISO 3245 needle bearings published here, listed from BK0306 to BK2526.

  • Bore diameter under the rollers (Fw): 7 mm on the BK0709 needle bearing, against 6 mm on the BK0609 and 8 mm on the BK0808.
  • Outside diameter (D): 11 mm on the BK0709 needle bearing, against 10 mm on the BK0609 and 12 mm on the BK0808.
  • Width (C): 9 mm on the BK0709 needle bearing, against 9 mm on the BK0609 and 8 mm on the BK0808.
  • Depth to the closed end (Ct): at least 7.4 mm on the BK0709 needle bearing, against at least 7.4 mm on the BK0609 and at least 6.4 mm on the BK0808.
  • Chamfer dimension (r): at least 0.4 mm on the BK0709 needle bearing, the same on the BK0609 and the BK0808.

Other sizes

Documents

Sources

koyo-bs007-bk, ntn-bearingfinder-bk, schaeffler-hr1-bk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-BK-SZ-BK0709.pdf

ISO 3245 drawn cup needle roller bearing, closed end (BK), BKO709 Size drawing - BKO709 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 5:1 Bearing BKO709 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →

docs/CC-ISO3245-BK-DS-BK0709.pdf

. CC-1$03245-BK-DS-BKO709 rev A 0 CommunityCAD Size datasheet - BKO709 ISO 3245 BKO709 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 7 mm shafts running directly on the rollers, closing a housing bore re Henn et Part key…

View full datasheet →