* CC-1S03245 -BK-DS-BK0408 rev A '?) CommunityCAD Size datasheet - BKO408
ISO 3245 BKO408 drawn cup needle roller bearing
Size datasheet: this bearing's values with their levels, conventions and sources.
For 4mm shafts running directly on the rollers, closing a housing bore
Part key iso3245 -bk0408
Files 1 STEP AP214 (simplified), cup and rollers
BK0408, front view, 2.5:1 BK0408, view from above, 3:1 Sym. Dimension Value Level Fw Diameter under the rollers 4 L1- 2 D Outside diameter 8 L1- 2 c Width 8 la - 2 ct Clear depth to the closed end > 6.40 La - 2 r Chamfer dimension r_s min > 0.3 L1- 2
Modeled value: nominal, else the midpoint of min-max. =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 3245 (edition not printed by the sources) Page 1/2 Drawn cup needle roller bearing - BKO408 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-1S03245 -BK-DS-BK0408 rev A '?) CommunityCAD Size datasheet - BKO408
Conventions
¢ Cup (illustrative): Wall s = (D - Fw)/6 thick; each open end's lip turned in to Fw + 2s, s thick. Not any maker's design.
« Needle rollers (illustrative): No cage. Diameter Dw = (D - Fw)/2 - s onthe circle Fw + Dw, length Ct - 3s, from Z = 2s, as many as fit at a pitch of 1.25 Dw, each a separate solid. Not any maker's design; measured only for fit.
« Closed end: A flat plate from the clear depth Ct (its minimum) to the width C, no dimple; its outside corner a quarter-round of r_s min.
« Corners: Outside corners are quarter-rounds of r_s min, the smallest any maker states; the shape isn't specified. Lip edges are sharp.
« Values: Fw, D and C at their nominals; Ct at its minimum; r at r_s min, the only limit the sources give.
« Markings and grades: No markings. Tolerances, radial clearance and lubricant are not geometry: one model per bearing.
Sources
Source Publisher Retrieved a256
schaeffler-hri-bk Schaeffler (INA) 2026-10-29 9e4e2e13d41b (kept outside the repo) koyo-bs007-bk JTEKT (Koyo) 2026-10-29 183fdf7204d6 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-ISO3245 -BK-DS.
ISO 3245 (edition not printed by the sources) Page 2/2 Drawn cup needle roller bearing - BKO408 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.