'?) CommunityCAD CC-JOINPLATE-DS-b8-inline-2 revA
Size datasheet - b8 -inline-2
30 B-type slot 8 inline plate, 2 holes (extrusion joining plate)
Size datasheet: this size's values with their levels, conventions and sources.
For joining 30 B-type slot 8 extrusions O oO O a ——_—_=_a_ay Part key extrusion -joining - plates - b8 - inline-2 Files 1 STEP AP214 (simplified) b8 -inline-2, outer face, 0.75:1 b8 -inline- 2, edge, 0.75:1 (hidden lines dashed) Sym. Dimensi Value Level a Length 5o* Lo: 1 w Leg width 25% Lo -1 t Thickness 3.2* lo- 1 d Hole diameter Tx lo -1 n Number of holes Qk lo -1 p Hole spacing 30* lo-1 r Corner radius 2x lo- 1
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard (makers' drawings) Page 1/2 Extrusion joining plate - b8 -inline- 2 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-JOINPLATE-DS-b8-inline-2 revA Size datasheet - b8 -inline-2
'?) CommunityCAD
Conventions
« House mark: The CommunityCAD mark recessed 0.3 mm into the outer face on its largest hole-free square (an L or T plate's corner, an inline plate's middle), clear of every hole and edge by one plate thickness; illustrative.
« Edges: Radius r at an inline plate's four corners and the 45° chamfer c at the outside corners Misumi chamfers, as drawn; every other edge sharp, including the hole edges and the inside corners. No countersinks, no markings.
« Values: No published standard: every plate is its reference maker's own design (Misumi HPT for B-type slot 6 and 8 and slot 10, OpenBuilds for V-slot), placed as its drawing places it; single source (LO, amber) unless a second maker states the same value. Hole positions, width and hole size are checked against the profile.
e Material: Each plate in its reference part's material, render and metadata only: Misumi's chromate- plated steel, OpenBuilds' anodised aluminium.
Sources Source Publisher Retrieved sha256 misumi-sheet-metal-plates MISUMI 2026-10-29 b16155d57c00 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-JOINPLATE-DS.
No published standard (makers' drawings) Page 2/2 Extrusion joining plate - b8 -inline- 2 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.