Extrusion joining plate, inline, Land T, b6-I-3
Size drawing - b6-I-3 values on the views - enlarged 2:1
c= 3* x 45° Leg width
Thickness Hole diameter Number of holes
Hole spacing
Hole to end
Corner chamfer Source levels Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. pW = Qk _ * L2 = the standard itself (or its complete free preview, or the maker's drawing). holes: n= 3 ' d= 5.5 L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: LO 8. Notes No published standard: each plate is its reference maker's design (ADR 0034). Blank: that plate's drawing doesn't use the symbol. Mark: sheet D02.
TITLE
'? CommunityCAD Size drawing, b6-I-3
STANDARDS FOLLOWED FAMILY / DETAIL No published standard (makers' drawings) Extrusion joining plate - b6-I-3
SHEET REV SCALE PROJECTION UNITS CC-JOINPLATE-SZ-b6-1-3 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.