i: CC-JOINPLATE-DS-b6-inline-4 revA ?) CommunityCAD Size datasheet - b6 -inline-4
20 B-type slot 6 inline plate, 4 holes (extrusion joining plate)
Size datasheet: this size's values with their levels, conventions and sources.
For joining 20 B-type slot 6 extrusions ———— Part key extrusion -joining - plates - b6 - inline-4 Files 1 STEP AP214 (simplified) b6 -inline- 4, outer face, 0.5:1 b6-inline- 4, edge, 0.5:1 (hidden lines dashed) Sym. Dimensi Value Level a Length 80* Lo: 1 w Leg width 18* Lo -1 t Thickness 2.3% lo- 1 d Hole diameter 5.5% lo- 1 n Number of holes 4x lo - 1 p Hole spacing 20* lo-1 r Corner radius 1.5% lo- 1
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard (makers' drawings) Page 1/2 Extrusion joining plate - b6 -inline- 4 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-JOINPLATE-DS-b6-inline-4 revA Size datasheet - b6 -inline-4
'?) CommunityCAD
Conventions
« House mark: The CommunityCAD mark recessed 0.3 mm into the outer face on its largest hole-free square (an L or T plate's corner, an inline plate's middle), clear of every hole and edge by one plate thickness; illustrative.
« Edges: Radius r at an inline plate's four corners and the 45° chamfer c at the outside corners Misumi chamfers, as drawn; every other edge sharp, including the hole edges and the inside corners. No countersinks, no markings.
« Values: No published standard: every plate is its reference maker's own design (Misumi HPT for B-type slot 6 and 8 and slot 10, OpenBuilds for V-slot), placed as its drawing places it; single source (LO, amber) unless a second maker states the same value. Hole positions, width and hole size are checked against the profile.
e Material: Each plate in its reference part's material, render and metadata only: Misumi's chromate- plated steel, OpenBuilds' anodised aluminium.
Sources Source Publisher Retrieved sha256 misumi-sheet-metal-plates MISUMI 2026-10-29 b16155d57c00 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-JOINPLATE-DS.
No published standard (makers' drawings) Page 2/2 Extrusion joining plate - b6 -inline- 4 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.