IEC 60086 cylindrical primary battery, AAA
Size drawing - AAA values on the views - enlarged 5:1
Sym. Dimension AAA
Body diameter 16.88 h_pos 2 0.80 9.50-10.50
43.90 43.30-44.50
Overall height
< 3.80 d_pos Positive contact diameter
h_pos Positive contact height oy
d_neg Negative contact diameter
' e_neg Negative contact recess
| d = 10.00 9.50-10.50
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L15 - LO 1.
Notes
No IEC 60086 edition is read: the values are the makers' datasheets, reconciled (ADR 0034). The negative end is modeled flush unless e_neg has both limits (sheet D0O2).
h = 43.90 43.30-44.50
TITLE
'? CommunityCAD Size drawing, AAA
STANDARDS FOLLOWED FAMILY / DETAIL IEC 60086 (no edition read: makers' datasheets) Cylindrical battery - AAA SHEET REV SCALE PROJECTION UNITS
CC-IEC60086-SZ-AAA A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE
q =,10.00 59 Fdebeb44F40d3270d991121040e54104493d4 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.