Battery holder, MPD BC4AAAPC
Size drawing - MPD BC4AAAPC values on the views - enlarged 2:1
Dimensio MPD BC4AAAPC
Overall length 50.50
Overall width 47.52 | = 50.50
Overall height 12.19
Terminal pitch 11.91
Terminal pin length 12.32
Terminal pin width 0.85
Terminal pin thickness 0.50
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 7.
Notes
No published standard: each value is the maker's own drawing of that part (ADR 0089). - = not dimensioned by that part's drawing: a house rule (sheet DO2) or not present.
Contacts, walls, bays and windows are illustrative: sheet DO2.
w1 = 0.85, t = 0.50
TITLE
'? CommunityCAD Size drawing, MPD BC4AAAPC
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (each maker's drawing) Battery holder - MPD BC4AAAPC SHEET REV SCALE PROJECTION UNITS CC-BATTHOLDER-SZ-mpd-bc4aaapc | A 21 Dimensions in mm
SPEC VERSION LICENSE PAGE ec102202cfd5583116e22079eF262796b321054a CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.