Battery holder, MPD BH2AAAPC
Size drawing - MPD BH2AAAPC values on the views - enlarged 2:1
Dimensio MPD BH2AAAPC
Overall length 51.60
Overall width 25.20
Overall height 12.70
Terminal pitch 12.70
Terminal pin length 11.94
Terminal pin width 0.81
Terminal pin thickness 0.64
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 7.
Notes
No published standard: each value is the maker's own drawing of that part (ADR 0089). - = not dimensioned by that part's drawing: a house rule (sheet DO2) or not present. Contacts, walls, bays and windows are illustrative: sheet DO2.
w1 = 0.81, t = 0.64
TITLE
'? CommunityCAD Size drawing, MPD BH2AAAPC
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (each maker's drawing) Battery holder - MPD BH2AAAPC SHEET REV SCALE PROJECTION UNITS CC-BATTHOLDER-SZ-mpd-bh2aaapc | A 21 Dimensions in mm
SPEC VERSION LICENSE PAGE ec102202cfd5583116e22079eF262796b321054a CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.