Battery holder, MPD BH4AAPC
Size drawing - MPD BH4AAPC values on the views - enlarged 2:1
Dimensio MPD BH4AAP'
Overall length 57.15
Overall width 61.72 |= 5715
Overall height 15.88
Terminal pitch 12.70
Terminal pin length 3.00
Terminal pin width
Terminal pin thickness
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 7.
Notes
No published standard: each value is the maker's own drawing of that part (ADR 0089). - = not dimensioned by that part's drawing: a house rule (sheet DO2) or not present. Contacts, walls, bays and windows are illustrative: sheet DO2.
TITLE
w1 = 0.76, t= 0.61 '? CommunityCAD Size drawing, MPD BH4AAPC STANDARDS FOLLOWED FAMILY / DETAIL No published standard (each maker's drawing) Battery holder - MPD BH4AAPC SHEET REV SCALE PROJECTION UNITS CC-BATTHOLDER-SZ-mpd-bh4aapc | A 21 € Dimensions in mm
SPEC VERSION LICENSE PAGE
ec102202cfd5583116e22079eF262796b321054a CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.