'?) CommunityCAD
CC-DRIVE25-DS-9.5revA Size datasheet - 9.5 mm
SFF-8201 9.5 mm drive
Size datasheet: this size's values with their levels, conventions and sources.
9.5 mm, front view, 1:5
Le hs xsi xs2 yb yb2 xb1 xb2 ds db ts tb du al cw cs cb cy
cz
ch cx cc
yc
Dimension
Height, A1 (SFF-8201)
Width, A4; max A4 + A5
Length, Note 2; max A6
Length over the connector, A11
Side holes above the bottom, A23 End to the first side hole, A52
End to the second side hole, A53 Side to the bottom holes, A28 Bottom holes across, A29
End to the first bottom holes, A50 End to the second bottom holes, A51 Side hole thread M, A26
Bottom hole thread M, A32
Side full thread, A38 (min)
Bottom full thread, A41 (min) Lead-in @, section 3's example Lead-in angle, section 3's example Connector width, A2 (SFF-8223) Datum B width, A3
Side to datum B, A13
Datum B centre off the centreline, A11
Connector centre height, A7 + A12
Connector height, A5 Connector past the end, A18 Datum C to the first bottom holes, A8&
-Y side to the slot centre (computed, cb + cs / 2)
9.5 mm, view from above, 1:5
Part key drives-2-5-9-:
5
Files 2 STEP AP214 (simplified +
threaded)
Value
9.50 9.30-9.70
69.85 100.20 100.50 ref
3.0)
14.0
90.6
4.0
61.7:
14.0
90.6
Viv Now
90 r 42.73 33.39 7 13.43
4.80
3.50 3.12-3.88
4.00 ref 0.30 ref 9.40 30.125
computed
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at it. * amber: one source (LO). house: a stated house rule. Level - independent sources.
SFF-8201 Rev 3.4 - SFF-8223 Rev 2.7 (SNIA)
2.5-inch drive - 9.5 mm - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
---
CC-DRIVE25-DS-9.5revA Size datasheet - 9.5 mm
'?) CommunityCAD
Conventions
« Envelope and frame: SFF-8201's form factor at its nominals: A1, A4 and Note 2's length; the maxima (A1 + A2, A4 + A5, A6) are printed, not modeled. Bottom face (datum X) at z = 0, the connector end toward +X, the width centred on Y, the connector toward -Y.
« Mounting holes: M3 side and bottom holes at every height (the bottom holes are optional at Al <= 7 mm, modeled), blind, full thread to A38 / A411, then a 118° drill point at the tap drill. Simplified: plain bores at D, thread in the metadata.
« Lead-in: SFF-8201 section 3 requires a lead-in and gives one example, a dl countersink at al: the model uses that example at every hole.
e Connector: SFF-8223 Option 1: a block cw x ch on datum B's centreline, its centre cz up, its face cx past the end; the keep-out under it open to datum C. No blades, key or latch recesses (an envelope, no ECAD).
« House look: Illustrative. Rounded outside edges; a label recess in the top with a black label and the CommunityCAD mark; the connector running on behind datum C; clear anodised aluminium. No cover screws, breather hole, PCB or maker text.
Sources
Source Publisher Retrieved sha256
sf¥8201-r3-4 SNIA SFF TA TWG 2026-11-05 457ada41fce9 (kept outside the repo) sff8223-r2-7 SNIA SFF TA TWG (SFF Committee) 2026-11-05 676ed1fbOa0a (kept outside the repo) seagate-100716627m Seagate Technology LLC 2026-11-05 aébd2d2a13df (kept outside the repo) seagate-100716627m-figures Seagate Technology LLC 2026-11-05 aébd2d2a13df (kept outside the repo) hgst-7k1000-r2-0-figures HGST, a Western Digital company 2026-11-05 006294898067 (kept outside the repo)
samsung-100698035c-figures Seagate Technology LLC (Samsung's drive 2026-11-05 24a22923ce00 (kept outside the repo) design, published after Seagate took over Samsung's hard drive business)
The whole series (verification map, drawings): CC-DRIVE25-DS.
SFF-8201 Rev 3.4 - SFF-8223 Rev 2.7 (SNIA) Page 2/2 2.5-inch drive - 9.5 mm - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
