CC-DRIVE25-DS-9.5 revA Size datasheet - 9.5 mm
'?) CommunityCAD
SFF-8201 9.5 mm drive
Size datasheet: this size's values with their levels, conventions and sources.
9.5 mm, front view, 1:5
9.5 mm, view from above, 1:5
Part key drives-2-5-9-5 Files 2 STEP AP214 (simplified + — threaded)
Sym. Dimension Value H Height, A1 (SFF-8201) 9.50
9.30-9.70 W Width, A4; max A4 + A5 69.85 pe | L Length, Note 2; max A6 100.20 pe | Le Length over the connector, A11 100.50 ref pea | hs Side holes above the bottom, A23 3.0 yes | xsl End to the first side hole, A52 14. o xs2 End to the second side hole, A53 90.6 Pos yb Side to the bottom holes, A28 4. 7 yb2 Bottom holes across, A29 61.7 : a xb1 End to the first bottom holes, A50 14. o ay xb2 End to the second bottom holes, A51 90.6 Pos | ds Side hole thread M, A26 | aa db Bottom hole thread M, A32 | aa a Side full thread, A38 (min) > 3.0 o tb Bottom full thread, A41 (min) > 2.5 Poo | dl Lead-in @, section 3's example 3S ret Cen al Lead-in angle, section 3's example 90 ret cw Connector width, A2 (SFF-8223) 42.73 ret [rn cs Datum B width, A3 33.39 7 ef a cb Side to datum B, A13 13.43 ret Cen cy Datum B centre off the centreline, A11 4.80 Pp es | cz Connector centre height, A7 + A12 3.50 [=o
3.12-3.88 ch Connector height, A5 4.00 ref pe | cx Connector past the end, A18 0.30 ref ps | cc Datum C to the first bottom holes, A8& 9.40 pts | yc -Y side to the slot centre (computed, cb + cs / 2) 30.125 computed
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at it. * amber: one source (LO). house: a stated house rule. Level - independent sources.
SFF-8201 Rev 3.4 - SFF-8223 Rev 2.7 (SNIA) Page 1/2 2.5-inch drive - 9.5 mm: Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 02F48ec29f9e7bFFOeF756F4F5d939300beee1e6
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-DRIVE25-DS-9.5 revA Size datasheet - 9.5 mm
'?) CommunityCAD
Conventions
e Envelope and frame: SFF-8201's form factor at its nominals: Al, A4 and Note 2's length; the maxima (A1 + A2, A4 + AS, A6) are printed, not modeled. Bottom face (datum X) at z = 0, the connector end toward +X, the width centred on Y, the connector toward -Y.
« Mounting holes: M3 side and bottom holes at every height (the bottom holes are optional at A1 <= 7 mm, modeled), blind, full thread to A38 / A41, then a 118° drill point at the tap drill. Simplified: plain bores at D, thread in the metadata.
« Lead-in: SFF-8201 section 3 requires a lead-in and gives one example, a dl countersink at al: the model uses that example at every hole.
e Connector: SFF-8223 Option 1: a block cw x ch on datum B's centreline, its centre cz up, its face cx past the end; the keep - out under it open to datum C. No blades, key or latch recesses (an envelope, no ECAD).
« House look: Illustrative. Rounded outside edges; a label recess in the top with a black label and the CommunityCAD mark; the connector running on behind datum C; clear anodised aluminium. No cover screws, breather hole, PCB or maker text.
Sources
Source Publisher Retrieved sha256
sf¥8201-r3-4 SNIA SFF TA TWG 2026-11-05 457ada41fce9 (kept outside the repo) sff8223-r2-7 SNIA SFF TA TWG (SFF Committee) 2026-11-05 676ed1fbOa0a (kept outside the repo) seagate-100716627m Seagate Technology LLC 2026-11-05 aébd2d2a13df (kept outside the repo) seagate-100716627m-figures Seagate Technology LLC 2026-11-05 aébd2d2a13df (kept outside the repo) hgst-7k1000-r2-0-figures HGST, a Western Digital company 2026-11-05 006294898067 (kept outside the repo)
samsung-100698035c-figures Seagate Technology LLC (Samsung's drive 2026-11-05 24a22923ce00 (kept outside the repo) design, published after Seagate took over Samsung's hard drive business)
The whole series (verification map, drawings): CC- DRIVE25-DS.
SFF-8201 Rev 3.4 - SFF-8223 Rev 2.7 (SNIA) Page 2/2 2.5-inch drive - 9.5 mm: Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 02F48ec29f9e7bFFOeF756F4F5d939300beee1e6
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.