'?) CommunityCAD
CC-ACFAN-DS-92x38 revA Size datasheet - 92x38
92x38 AC axial fan
Size datasheet: this frame's values with their levels, conventions and sources. Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
Frame
Mounting holes
Connection
92x38, front face, 0.25:1 92x38, side view, 0.4:1 Frame material
Part key
Files
Sym. Dimension
a Frame side
t Frame thickness
e Hole spacing
dh Hole diameter
k Flange thickness (open corners) w Width across flats (round frame) dv Venturi (makers', not modeled)
92 mm square, 38 mm thick
4 x @4.2 through t, in two flanges k = 6.3 mm (house value, illustrative: no maker dimensions it)
lead wires or terminal tabs, by model (not modeled)
die-cast aluminium (drawn matte black)
fans -ac-axial-92x38 1 STEP AP214 (simplified)
Value Level 92 la -2 38 La - 2 82.5 l1-2 4.2 La 2
Modeled value: the nominal. * amber: one source (LO). c: a source value was corrected. - : not dimensioned by the makers (k: the house flange,
see Mounting holes). Level - independent sources.
No published standard (makers' drawings)
Page 1/2
AC axial fan - 92x38 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 54a208abf031c40a10474bfF4c55152d66ee5412
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-ACFAN-DS-92x38 revA Size datasheet - 92x38
'?) CommunityCAD
Conventions
Illustrative rotor: Venturi bore s - (a - e)/2, s the smallest outside width (a, or w on the round frame), hub, four struts at the outlet face and swept blades, as the DC fans. Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
« Frame sides: Open between two flanges k thick, one at each face; each hole runs through both. Where no drawing tolerances k, k is the house flange t/6 (to 0.1 mm, at least 1.5 mm), labelled (house).
« Mounting holes: Square frames: four through holes dh on a square of side e. Round frame: circle a cut by flats w apart, two holes dh e apart on the horizontal centreline.
« Values: Reconciled from two or more makers' drawings; where they differ on a, w or dh, the largest stated, so every maker's frame fits. dv is recorded, not modeled.
e Connection, labels: Lead wires or terminal tabs by model, neither modeled; no labels or arrows. Die-cast aluminium frame, drawn matte black. Intake at +Z, airflow toward -Z.
Sources
Source Publisher Retrieved sha256
mechatronics-ac-axial Mechatronics Fan Group 2026-10-29 Jab9ddfé6eb3 (kept outside the repo) orion-ac-axial Orion Fans (Knight Electronics, Inc.) 2026-10-29 dee795d93132 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-ACFAN-DS.
No published standard (makers' drawings) Page 2/2 AC axial fan - 92x38 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 54a208abf031c40a10474bfF4c55152d66ee5412
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.