EN 10219 steel hollow section, 90x50x3
Size drawing - 90x50x3 values on the views - enlarged 2.5:1
Sym. Dimensi
Outside height
Outside width
Wall thickness
Outside corner radius
Inside corner radius, ro - T
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 4 - LO 1.
Notes
ro: the midpoint of the external corner band, its min-max in brackets (ADR 0120 row 3). ri: internal corner not specified by the standard, concentric (ADR 0120 row 5).
TITLE
tia 3 ref* '? CommunityCAD Size drawing, 90x50x3
STANDARDS FOLLOWED FAMILY / DETAIL
EN 10219-2 (through free tables) Steel hollow section - 90x50x3
SHEET REV SCALE PROJECTION UNITS CC-EN10219-SZ-90x50x3 A 2.5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 7cOddbd21b173b035879e140745122614bF45521 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.