8x30 Stepper Motor, NEMA ICS 16 size drawing (PDF)

Datasheet — 8x30 Stepper Motor, NEMA ICS 16 by Milo

Open the PDF
8x30 Stepper Motor, NEMA ICS 16Get the CAD model8x30 Stepper Motor, NEMA ICS 16CC-NEMA-SZ-8x30.pdf

Text of this datasheet

NEMA hybrid stepper motor, frame x body length, 8x30

Size drawing - 8x30 values on the views - enlarged 4:1

Sym. Dimensi

Body length (house)

BD Body square

Mounting hole spacing

Number of mounting holes

Tapped hole thread

Pilot diameter

Pilot height

Shaft diameter

Shaft length from the mounting face 10

.5* Across the shaft's flat Sot

* Lf Flat length 7

Source levels

OBD < 20.3 Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L18 - LO 3.

Notes

NEMA ICS 16 for frames 17, 23, 34; makers' drawings for the rest (ADR 0034). Body length: a house length backed by the makers (#1227 item 2 A).

Caps, stack, connector and label illustrative: sheet DO2.

TITLE

'? CommunityCAD Size drawing, 8x30

STANDARDS FOLLOWED FAMILY / DETAIL

NEMA ICS 16 Table 4 (frames 17, 23, 34) and makers' drawings NEMA hybrid stepper motor - 8x30 SHEET REV SCALE PROJECTION UNITS CC-NEMA-SZ-8x30 A 41 € Dimensions in mm SPEC VERSION LICENSE PAGE 304229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.