40 I-type slot 8 aluminium extrusion, per item Line 8, 80x80
Size drawing - 80x80 values on the views - scale 1:1
Sym. | Dimension (mi Profile width
Profile height
Core pitch (cell side)
r = 4* (4 corners) Slot opening
Lip thickness
@ d = 6.8* (each core) Slot depth
Core bore diameter
Outside corner radius Gx
Sectional area, mm? (catalog) 2666*
Modeled area, mm? (detailed) 2670 (+0.2 %)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L13 - LO 6.
Notes
L1 here = item and Motedis agree; value = the maker's drawn nominal.
* = item Line 8's data sheet alone (e: Motedis's differs, unmapped).
Modeled area: the detailed section, checked against A within 1% (ADR 0093). DETAILED SECTION - item's own, read from its Line 8 data sheet drawing (ADR 0093)
Detailed level - 80x80 - 1:1 item's section, from its data sheet (ADR 0093)
TITLE
'? CommunityCAD Size drawing, 80x80
STANDARDS FOLLOWED FAMILY / DETAIL No published standard (ADR 0034) - per item Line 8 - Motedis (outline, slot) Aluminium extrusion - 80x80
SHEET REV SCALE PROJECTION UNITS
CC-EXTR40-18-SZ-80x80 A 1:1 € Dimensions in mm SPEC VERSION LICENSE PAGE c11b872e81fe4ea779a93a8b42a2cSdadf16472d CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.