CC-EN10219-DS-80x40x5 revA Size datasheet - 80x40x5
'?) CommunityCAD
80x40x5 steel hollow section
Size datasheet: this size's values with their levels, conventions and sources.
Part keys en10219-80x40x5x100 ... (one per stock length)
Files 6 STEP AP214 (simplified), one per stock length
80x40x5, end view, 0.5:1
Sym. Dimensi Value Level
H Outside height 80 L1 - 3
B Outside width 40 L1 - 3
T Wall thickness 5 L1 - 3
ro Outside corner radius 10.0 L1 - 3 8.0-12.0
ri Inside corner radius, ro - T 5 refx Lo -1
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
EN 10219-2 (through free tables) Page 1/2 Steel hollow section - 80x40x5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 7cOddbd21b173b035879e140745122614bf45521
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-EN10219-DS-80x40x5 revA '?) CommunityCAD Size datasheet - 80x40x5
Lengths | Thread Part key
100 built - - en10219-80x40x5x100
250 built - - en10219-80x40x5x250
500 built - - en10219-80x40x5x500 1000 built - - en10219-80x40x5x1000 2000 built - - en10219-80x40x5x2000 6000 built S - en10219-80x40x5x6000
One STEP file per stock length.
Conventions
« Corners: Outside corners are quarter circles of radius ro, the midpoint of the external corner band, tangent to the flat sides. Inside corners are concentric with them, ri = ro - T, a uniform wall round the corner.
e Weld seam and tolerances: No weld seam: a plain wall inside and out. Nominal H, B, D and T; EN 10219- 2's tolerances aren't modeled.
« Ends, lengths, finish: Flat ends square to the length, sharp edges (a sawn bar). The stock lengths as file options, length tolerance not modeled. No markings. Mid-grey mill scale with bright sawn ends, appearance only.
Sources
Source Publisher Retrieved sha256
roymech-en10219 roymech.org 2026-10-31 a7d0a0261cbb
tata-hybox-en10219 Tata Steel Europe n/a 2c9d4edb8dde (kept outside the repo) bmsteel-en10219 BM Steel 2026-10-31 fOc1cec9e957
parker-en10219 Parker Steel n/a #98bedd74af3 (kept outside the repo) nskenzai-en10219 Nippon Steel Kenzai 2026-10-31 d4d16c5eb419
The whole series (verification map, corrections, drawings): CC-EN10219-DS.
EN 10219-2 (through free tables) Page 2/2 Steel hollow section - 80x40x5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 7cOddbd21b173b035879e140745122614bf45521
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.