'?) CommunityCAD CC-1S02339-DS-8 revA
Size datasheet - 08
ISO 2339 8 taper pin, 1:50
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Diameter @8 small end; 8.6 mm large end atl = 30 Lengths 21 generated, | = 22-120 Files 21 STEP AP214 (one detail level) 8 x 30, front view, 2:1 Sym. Dimension Value Level d Small-end diameter (h10) 8 L1-2 7.942-8 a End dome, axial length 1 ref L1- 2 1:x Taper on diameter, 1:x 50 La - 2
Modeled value: nominal, else the midpoint of min-max. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 2339:1986 Page 1/2 Taper pin - @8 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S02339-DS-8 revA Size datasheet - 08
'?) CommunityCAD
Lengths | Thread Part key 22 built - - is02339-d8x22 24 built - - is02339-d8x24 26 built - - is02339-d8x26 28 built - - 1s02339-d8x28 30 built - - is02339-d8x30 32 ~~ built S - is02339-d8x32 35 built - - is02339-d8x35 40 built - - 1s02339-d8x40 45 built - - is02339-d8x45 50 built - - is02339-d8x50 55 built - - is02339-d8x55 60 built - - 1s02339-d8x60 65 built - - is02339-d8x65 70 built - - is02339-d8x70 75 built - - is02339-d8x75 80 built - - 1s02339-d8x80 85 built - - is02339-d8x85 90 built - - 1s02339-d8x90 95 built - - is02339-d8x95 100 built - - is02339-d8x100 120 built - - is02339-d8x120
One STEP file per length, one detail level.
Conventions
« dat its nominal (h10 lies below it); the large end is d + 1/50.
« Ends: a spherical dome of axial length a at both ends (decision #556, ADR 0077). ¢ Types A and B: one model; the finish is metadata.
« Sharp edges, no markings; material and finish are metadata only.
Sources Source Publisher Retrieved sha256 fasten-it-is02339 fasten.it 2026-10-27 ecd8a2d420d6 fasten-it-din-en-22339 fasten.it 2026-10-27 cafa0708d3f8 boltport-iso2339 Boltport 2026-10-27 2cb24220F726 minibearings-taper-pins Miniature Bearings Australia 2026-10-27 41ef3bd40d63 pts-taper-pins PTS UK (pts-uk.com) 2026-10-27 28ab6d2baee5
The whole series (verification map, drawings): CC-ISO2339-DS.
ISO 2339:1986 Page 2/2 Taper pin - @8 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.