'?) CommunityCAD CC-1S08752-DS-8 revA
Size datasheet - 08
ISO 8752 @8 slotted spring pin, heavy duty
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Diameter @8 (the hole); free [| | \ outside d1 = 8.65 mm,
bore 5.65 mm
Lengths 27 generated, | = 10-120 Files 27 STEP AP214 (one detail level) || 8 x 20, front view, 3:1 Sym. Dimension Value Level d Nominal diameter (the hole's, H12) 8 L1- 2 di Outside diameter, before mounting 8.65 L1 +4 8.5-8.8 d2 Inside diameter, before mounting (ref) 5.5 ref 1-4 s Wall thickness 1.5 Ll: 4 a End chamfer, axial length 1.8¢c L1- 2 1.6-2.0 w Slot width mt (d1 max - d), clause 4 2.513* lo: 1 F Double shear strength, min, KN > 42.76 L1- 3
Modeled value: nominal, else the midpoint of min-max, before mounting. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 8752:2009 Page 1/2 Spring pin - @8 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S08752-DS-8 revA Size datasheet - 08
'?) CommunityCAD
Lengths | Thread Part key 10 built - - iso08752-d8x10 12 built - - is08752-d8x12 14 built - - iso8752-d8x14 16 built - - is08752-d8x16 18 built - - is08752-d8x18 20 built S - iso8752-d8x20 22 built - - is08752-d8x22 24 built - - is08752-d8x24 26 built - - iso8752-d8x26 28 built - - is08752-d8x28 30 built - - is08752-d8x30 32 built - - is08752-d8x32 35 built - - is08752-d8x35 40 built - - is08752-d8x40 45 built - - is08752-d8x45 50 built - - iso08752-d8x50 55 built - - iso8752-d8x55 60 built - - is08752-d8x60 65 built - - is08752-d8x65 70 built - - iso8752-d8x70 75 built - - iso08752-d8x75 80 built - - is08752-d8x80 85 built - - is08752-d8x85 90 built - - is08752-d8x90 95 built - - is08752-d8x95 100 built - - iso8752-d8x100 120 built - - iso8752-d8x120
One STEP file per length, one detail level. Listed by one source only, not generated: | = 36.
Conventions
« Modeled free, before mounting: d1 at the middle of its band, bore d1 - 2 s.
¢ Slot: full length, radial faces, w = mt (d1 max - d) (not specified by the standard; from the clause 4 closing requirement). « Ends: a chamfer a long to d3 = d1 - s at both ends (house rule, ADR 0061).
« Sharp edges, no markings; material and finish are metadata only.
Sources
Source Publisher Retrieved sha256
iso8752-2009-sample ISO (preview published by iTeh Standards) n/a 7594fabe5014 (kept outside the repo) fasten-it-iso8752 fasten.it 2026-10-26 c901b114ee7a
fuller-iso8752 Fuller Fasteners 2026-10-26 e3c86e160c54
fasteners-eu-iso8752 fasteners.eu 2026-10-26 fbe1001a16a0
spirol-iso8752 SPIROL 2026-10-26 d71481d70a68
pule-iso8752-slot CommunityCAD 2026-10-27 1ddaéd6d18dc
The whole series (verification map, drawings): CC-ISO8752-DS.
ISO 8752:2009 Page 2/2 Spring pin - @8 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.