* CC-1S02338-DS-8 revA '?) CommunityCAD Size datasheet - 08
ISO 2338 8 parallel pin, m6
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Diameter @8 m6, modeled at 8.0105 mm
Lengths 20 generated, | = 14-80
Files 20 STEP AP214 (one detail level)
8 x 20, front view, 3:1
Dimension
d Nominal diameter 8 m6 Tolerance band m6 (deviation from d) 0.0105 1-2 0.006-0.015
c End chamfer, axial length 1.6 ref a End chamfer angle to the surface, deg 15 ref
Modeled value: nominal, else the midpoint of min-max. m6: deviation from d. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 2338:1997 - ISO 286-2 (tolerance class m6) Page 1/2 Parallel pin - @8 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec d48b25e912c3742c9e061547a7d1d28F04a1258c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD
CC-1S02338-DS-8 revA Size datasheet - 08
Lengths
| Thread
14 built - 16 built - 18 built - 20 built - 22 built - 24 built 3 26 built - 28 built - 30 built - 32 built - 35 built - 40 built 5 45 built - 50 built - 55 built - 60 built - 65 built - 70 built - 75 built - 80 built -
One STEP file per length, one detail level.
Conventions « Diameter: the middle of the ISO 286-2 m6 band (h8 isn't modeled).
Part key
iso2338-d8x14 iso02338-d8x16 iso02338-d8x18 iso2338-d8x20 iso02338-d8x22 iso02338-d8x24 iso02338-d8x26 iso02338-d8x28 iso02338-d8x30 iso02338-d8x32 iso02338-d8x35 iso2338-d8x40 iso02338-d8x45 iso2338-d8x50 iso2338-d8x55 iso02338-d8x60 iso02338-d8x65 iso2338-d8x70 iso2338-d8x75 iso2338-d8x80
« Ends: a chamfer c at ~ 15° to the surface at both ends, flat end faces (owner entry from ISO 2338 Figure 1).
« Sharp edges, no markings; material and finish are metadata only.
Sources
Source Publisher
iso2338-1997-sample ISO (preview published by iTeh Standards)
iso2338-1997-sample-text ISO (preview published by iTeh Standards)
fasten-it-is02338 fasten.it
opac-iso2338 OPAC
kipp-k2013 KIPP (copy hosted by Marek)
mechcodex-dowel-pins-metric MechCodex
boltport-iso2338 Boltport
engineersedge-iso286-shafts Engineers Edge
mechcodex-dowel-pins-metric-mé MechCodex
The whole series (verification map, drawings): CC-ISO2338-DS.
ISO 2338:1997 - ISO 286-2 (tolerance class m6) Parallel pin - @8 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC
Retrieved
n/a
n/a
2026-10-25 2026-10-25 2026-10-25 2026-10-25 2026-10-25 2026-10-25 2026-10-25
sha256
841b4692d664 (kept outside the repo)
841b4692d664 (kept outside the repo)
dbb0979696ad Sd3dee2cf8e4 335b94d398a7 2cefO04b5d7F 12146dbe9fc8 9799d88b4078 2cefO04b5d7F
Page 2/2
spec d48b25e912c3742c9e061547a7d1d28F04a1258c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.