ISO 2341 clevis pin with head, types A and B, @8
Size drawing - @8 values on the views - | = 32 shown: enlarged 2:1
Sym. | Dimensio
Shank diameter (h11)
Head diameter (h14) e = 1ref, B = 45° ref* (head chamfer)
Head height (js14)
Head chamfer, axial length
Underhead fillet radius
End chamfer, axial length, max
| = 32 shown lengths 16-80 Split-pin hole, type B (H13)
Hole axis to free end, type B, min
d1=2 | 45 refx
Head chamfer angle from the axis, deg
ke End chamfer angle from the axis, deg 50 ref
Cc s 2, a = 30° ref* (end chamfer)
End face diameter (d - 2 c tan a)
Head top face diameter (dk - 2 e tan B)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L18 - LO 2.
Notes
c at its max and le at its min (single limits); d, dk, k, d1 at their nominals.
a, B: drawn only; one owner entry from the ISO 2341 figure (#604), so amber. Type A is type B without the hole; both are built for every length.
TITLE
'? CommunityCAD Size drawing, ®8
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2341:1986 Clevis pin - types A, B- @8
SHEET REV SCALE PROJECTION UNITS CC-1802341-SZ-8 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
